The necessary knowledge of the blower safety operation specification has the following points:
1. Before each shift, you must add lubricant to each moving part. (manipulator, robot guide, opening and closing guide rail)
2. The swing arm can be added once every (3 - 4) days. The heating chain has a large chain and a small chain once a month. Always check if the main unit reducer and the warmer reducer are short of oil. The main bearing can be added once every (2 - 3) months.
3. Check whether the moving parts are firm before the production, whether the screws are loose or not, especially in the place with strong impact force, whether the belt transmission part is abnormal.
4. Check whether the high pressure gas source, low pressure gas source, power source and water source are normal.
5. Check each emergency stop switch, safety door switch, protection device detection switch is normal.
6. Check the heating head to enter the embryo, and whether the part of the embryo is working properly. If the insert is not in place, the nut of the preform can be adjusted.
7. Check the lamp for damage and breakage. Replace it in time.
8. Check whether the pneumatic components are leaking and the action is sensitive.
9. Check if the triplet is abnormally leaking, blocked, and the water storage capacity of the cup is too full.