First, the cause of the dent
1, the thickness of each part of the product is different
2, the mold is under pressure
3, mold cooling is not enough
4. Deformation due to insufficient cooling time
Second, the associated knowledge
1. In the process of producing products, the dent is the most frequent occurrence of the bad phenomenon. The plastic injected into the mold shrinks when it cools. The early cooling part is the first hardened surface, and the inside will generate bubbles. The so-called dent is cooling. The slow portion produces a conspicuous concave surface in the direction in which the bubble contracts.
2. Materials with large shrinkage are also prone to dents. When the molding conditions are to be changed to eliminate the dents, the setting conditions should be set in a direction in which the shrinkage is small. That is, the mold temperature, the barrel temperature are lowered, and the injection pressure is increased, but it should be noted that residual internal stress may be caused thereby.
3, because the dent is not conspicuous, so if it does not affect the appearance, there is a deliberately processed on the mold into a corrosive appearance, such as striate, granular and so on. Also, if the molding material is HIPS, it is also effective to lower the mold temperature to lower the finish. However, once these methods have dents, it is difficult to repair the polished products.
Third, the solution
1. Instant: Increase the injection pressure, extend the injection pressure holding time, reduce the barrel temperature and mold temperature, and force cooling in the place where the dent is generated.
2, short-term: fill the flow edge where the dent is created. When there is a narrow place on the side of the material where the dent is generated, the side is thick.

3. Long-term: The difference in thickness of the design product should be completely avoided. Ribs that are prone to dents should be as short as possible.

Our company export High Speed Moulding Machine. we have a whole set of quality management system. If you have interested in our products, pls feel free to contact China Molding Machine Factory.

high speed plastic machine