1 An Plastic Injection Molding Machine and mold protection Before the injection molding machine is stopped, the mold should be opened to a distance of 5-10mm, so that the hinge mechanism (curved arm) mechanism of the clamping machine is in a semi-straight state, so that the hinge mechanism (curved arm) of the injection molding machine is in an unstr...

I. Lifting and disassembling of injection moulding machines The small machine is integral and does not need to be disassembled and assembled. When lifting, the adjusting mode should be adjusted to the minimum die thickness. The disassembly and assembly of the machine will be completed by the large crew of the Plastic Bottle Making Machine Supp...

I believe that everyone in the industry knows that the mold opening force of this Energy Saving Plastic Injection Machine is completely less than the clamping force, so the reason why the injection molding machine fails to open the mold may be that the resistance of the mold opening is greater than the mold opening force. What is the reason that the injec...

The Plastic Molding Injection Machine is a long-term operation of the mechanical equipment. It is very important first when the injection molding machine is opened. It is assumed that the injection molding machine has failed at the beginning of the injection molding machine, which leads to the completion of the work. No, so how should we deal with the fau...

In the manufacturing process of general Plastic Injection Mould, we often encounter some common problems, such as black spots often found, or discoloration coking during injection molding, but the main reason for these problems is that the injection molding products stay in the barrel. The time is too long, resulting in decomposition and coking of the inj...

There is a bad phenomenon of overheating and discoloration of injection molded parts. There are many reasons for this. For example, when the polymer is heated too much, the molecular chain will split, and it will be thermally degraded or burned. The phenomenon. Sometimes only some yellow discoloration is seen, which also shows that there has been a slight th...

The working process of injection molding machine is generally divided into several stages such as clamping, injection, melting, holding, cooling, mold opening and ejection. Each stage requires different pressure and flow, and the pressure and cooling are the power saving rate. Two stages. Why are the power saving effects of these two stages obvious? In th...

Both the Extrusion Blow Molding Machine and the injection molding machine are plastic processing machines. The two sound similar, but they are actually different. There are many differences between plastic extruders and injection molding machines. The following are introduced by professionals to understand more about the two machines. The extruder i...

With the wide application of High Speed Injection Molding Machine, more and more businesses are now paying attention to injection molding machine products. However, what is the difference between a high-speed injection molding machine and a general injection molding machine? This has obviously become a topic of popular discussion. In general, high-speed i...

Unlike other industrial equipment, Horizontal Injection Molding Machine require a lot of operations that the user needs to know before using them. These can list some things to be aware of before starting the machine. In the following content, we will make a systematic summary of this point. I hope that you can follow these rules when you operate, so that...

In the production process, the main factor that usually affects the dimensional accuracy of the Plastic Injection Mould is the shrinkage of the injection molded part. The greater the shrinkage, the worse the accuracy. Therefore, due to the large shrinkage of PP and POM injection molded parts, the accuracy of their injection molded parts is usually poor. T...

In the plastics industry, the Horizontal Injection Molding Machine is an aid to the production of products, but it has a decisive role. In order to shorten the finished product injection cycle, China Molding Machine Factory use high-speed injection molding machines to improve production efficiency. However, the horizontal injection molding machine will ha...

There are various Horizontal Injection Molding Machine on the market. People have to make choices before installation. Some people may not find the right way in the process of selection, which leads to various problems. appear. How do injection molding machines make a general choice at this time? Whether there are suitable ways and methods, the following ...

Plastic Injection Mould is a tool for the production of plastic products. It also has tools that are precise and vulnerable. Therefore, our injection molding is a processing method that is used in mass production of some complex shapes. In the process of injection molding, if we make a mistake in one place, it will easily lead to the damage of the mold. What...

The so-called Large Plastic Injection Machine production of small molds refers to the production of small-scale molds with injection molding machines of more than one level. There are many advantages in using small machines to inject small molds, and there are also disadvantageous factors. Let's talk about its advantages and disadvantages: One. Adva...

Plastic Bottle Making Machine Suppliers analyze the repetitive problem of injection molding machine for you The emergence of Injection Moulding Machine is an important equipment to realize plastic molding processing. It is an important equipment for realizing large-scale and batch processing. In the process of processing, some problems are the main ...

In the process of daily production of injection molding machine, the corresponding temperature will be generated in each process. The manufacturer of the injection molding machine reminds you that if the temperature generated is too high, the product will melt and shunt prematurely. If the temperature is too low, the product will also be The quality has a...

1. Oil leakage, this is the most common. Better solved. It is basically possible to change the sealing ring. 2, linkage, is to enter an action, the machine will do another action after the action, or when you pull the security door, either the template follows, or the shot is followed, the problem is generally the circuit Problem, carefully check th...

1.Plastic processing Since the PET macromolecule contains a lipid group and has a certain hydrophilicity, the pellet is sensitive to water at a high temperature. When the moisture content exceeds the limit, the molecular weight of the PET decreases during processing, and the product is colored and brittle. Therefore, before processing, the material must be...

In practice, there is no difference between the Plastic Injection Mould of vertical injection molding machine and the horizontal injection molding machine, but the vertical injection molding machine is often used in the occasion of embedded hardware beer plastic. At this time, horizontal hardware or other embedded parts are not well fixed. For example, po...